Installation Instructions

9
OPERATIONS
4. During playback:
GENERAL OPERATION:
1. Connected the unit to AC power as previously instructed. The Red Standby Indicator on the
front of unit will illuminate.
2. Press the STANDBY/SOURCE Button on the top of unit or press the Button on the Remote
Control to power on the unit from Standby mode.
3. Press the STANDBY/SOURCE Button on the top of unit or press the SOURCE Button on the
the front of unit will changes as your selection (see list below):
BT (Bluetooth) Blue
LINE IN Green
AUX IN Purple (Red + Blue Mixed)
A. Press and release the or buttons on the unit or press the VOL + or VOL- buttons on the
Remote Control repeatedly to adjust volume level as desired.
B. Press the (Mute) Button on the Remote Control to mute the sound temporary, press again
to turn it back.
5. When finished listening, press and hold the STANDBY/SOURCE Button on the top of unit
approximately 2 seconds or press the Button on the Remote Control to turn the unit to
Standby mode.
Playback Mode:
Color of the INDICATOR on front panel
Remote Control repeatedly to switch to desired playback mode. The color of the indicator on
OPTICAL IN Indigo (Blue + Green Mixed)
C. Press the EQ button on remote control repeatedly to select and play in desired EQ (POP,
ROCK, JAZZ, CLASSIC, COUNTRY) mode.
6. To save energy, unplug the AC/DC Adaptor from the wall outlet if you may not use the unit for
an extended period of time.
The color of the indicator on the front of unit will turn to red.