Owner`s manual

14
In stop playback, press the SETUP button
on the Remote Control, the setting menu will
appear on the screen. Using the Numeric;
Direction and ENTER buttons to set or reset
the selected functions.
General Setup Page
● Tv Shape: To set the aspect ratio of the
screen to match the current movie.
● Angle Mark: To turn ON/OFF the angle
mark. When turn on, if multi-angle is available
in the current disc. The angle mark will appear
on the screen.
● Osd Lang: To set the language of on screen
display.
● Screen Saver: To turn ON/OFF the screen
saver. If set to on, when the disc stop playback
couple minutes, the screen saver will appear
on the screen.
● Last Memory: To turn ON/OFF the last
memory. When set to on, if playback the
currect disc. It will start playback at the point
you were stopped last time.
Speaker Setup Page
● Downmix
Set the rear audio channels to stereo (hearing
the rear-left channel in Dolby 5.1 disc in left
speaker; rear-right channel in right channel)
or Lt/Rt mode (hearing rear-right and rear-left
channel in both right and left speakers).
Dolby Digital Step
● Dual Mono:
Select and set the audio channels to play.
● Dynamic:
Set the dynamic level or turn it off.
Video Setup Page:
● Picture: Set the picture quality of main unit.
● Video Out: Set the picture quality of the
Video output signal through AV Out jack.
● Aspect ration: Set the picture size of Main
unit to 4:3 or 16:9 to match the aspect ration of
the movie.
NOTE: The aspect ration of the Video Out
signals cannot turn to 4:3.
Tv Shape Lb
Angle Mark On
Osd Language Eng
Screen Saver On
Last Memory Off
- - General Setup Page - -
Go To General Setup Page
Downmix Str
- - Speaker Setup Page- -
Go To Speaker Setup Page
SETTING MENU
Dual Mono
Dynamic
- - Dolby Digital Setup- -
Go To dolby digital setup
Picture
Video Out
Aspect ratio
- - Video Setup Page - -
Go To Video Setup Page
CTFT712英语说明书.indd 14 2012-5-14 11:29:17