Battery Recharge The player had a build-in DC 3.7V, 250mA Lithium battery. Recharging the battery as: Power ON the player by slide the POWER switch to ON position. Connect the player to the computer by the supplied USB connection cable. The display on the unit will shows as below and will start to charging automatically: NOTE: 1) For the first time to recharge the build-in battery, charge it at least 10 hours. For normal recharge, it need approximate 4 hours.
files transferring, set the player in USB DISK mode as: 1. Power on the player by slide the POWER Switch to ON position, the setting manual (FIG. 1) will appear on the display automatically. FIG.1 FIG.2 2. Press the >>I or I<< button to select SETUP then press MENU button to enter. 3. Press >>I or I<< button to select Online Device (FIG. 2) then press MENU Button to enter. 4.
computer will detected the player and show: 3. Select and turn on the Windows Media Player in the computer and double click the SYNC button on the menu bar. SYNC button 4. Drag the specific DRM songs into the sync list . 5. Double click the Start Sync button on the Windows Media Player to start synchronize the DRM songs into the player. 6. When finished, disconnect the player from the computer.
Media Player 10 or 11. 2. Only the Window XP and Vista or latest operation system of computer can installed the Windows Media Player 10 or 11. 3. Do NOT disconnect the player during files transferring. Otherwise, the DRM information in the unit may corrupt, you cannot playback the DRM songs again. In this case, you should deleted all the DRM songs and information in the unit as: 3.1 Connect the player to the computer, delete all the files/folders in the player. 3.2 Disconnect the player from the computer.
Install AMV Converter and Player in the computer 1. Insert the supplied installation CD into the CD Drive in your computer; the List of Folders in the CD will appear on the computer’s screen automatically. 2. Selected the “MP3SET4 16” and enter. 3. Selected and double click “setup.exe” and follow the on-screen instructions to install the software.
NOTE: Before using this converter, press the HELP button on the AMV Converter to read the detail Instruction Manual of the Converter. Some video titles have built in protection software that, copying is prohibited. Only unprotected video contents of the above formats are possible be converted by the AMV converter. There are some video files that may be suing the compatible format’s name, but actually are different formats, so that the AMV converter cannot handle.
S/N Description S/N Description 1 >II Button 6 Button 2 MENU Button 7 Power ON/OFF Switch 3 USB Jack 8 Button 4 VOL Button 9 LCD Display 5 Phones Jack 10 MIC (Microphone) Display Overview 13
S/N Description S/N Description 1 EQ Mode 8 Current Song’sName 2 Repeat Mode 9 Lyric Indicator 3 Volume Level 10 Bitrate of current Track 4 Battery Meter 11 Elapsed Time 5 Total Numbers of Tracks 12 Elapsed Time of Current Track 6 Current Track Number 13 Format of Current Track 7 Real time Audio Spectrum 14 Current Folder’s Name Battery Indicator = Battery full power. = Battery empty, connect the unit to the computer for recharging.
Basic Operation 1. Power On/Off: 1.1 Power On: ● Slide the Power ON/OFF Switch to ON position to power on the player. 1.2 Power OFF/Standby: ● In power on or playback modes, press and hold the >II Button to power off (Standby mode) the player. To power on the player again from the standby mode, press and hold the >II Button again, or ● Slide the Power ON/OFF Switch to OFF position to power off the player.
Main Menu 1. When power on the player, the setting menu will appear on the display automatically. 2. In the others mode, press and hold the MENU button until the setting menu appear on the display. 3. In the setting menu (or sub-menus), press the >>I or I<< Buttons repeatedly to selected the specific functions, then press the MENU button to confirm the selections. After setting, press and hold the MENU button to return to the main menu or press the MENU button return to previously menu. 4.
9.1 If DRM Time is selected, press MENU button to read the DRM time. Press and hold the MENU button to exit. (The DRM time is for reference only, it is not the real time and can’t be adjust by the user, it will be set or updated every times when you download the DRM songs through the Windows Media Player and computer.) 9.2 If LCD set is selected, press MENU button to enter the setting menu. Press the >>I or I<< button to select Black or Exit.
player, it will auto power off when sleep time is up. If Contrast is selected, press MENU button to enter the setting menu, press the >>I or I<< button to set the contrast level from 0-15 as desire, then press and hold the MENU button to save the setting and exit. 9.6 If Online Device is select, press MENU button to enter the setting menu, press the >>I or I<< button to select Media Device or USB Disk. Press and hold the MENU button to save the setting and exit.
4. Press the >>I or I<< button to select Local folder; Delete file or Delete all then press the MENU button to enter: 4.1 If Local folder is selected, press the >>I or I<< button to searching the specific songs in the folders. If the specific files was found, press the MENU button to confirmed, then press >II button to start playback the selected song. 4.2 If Deleted file is selected, the list of songs will appear on the display.
9.1 If Repeat is selected, press the >>I or I<< Buttons to select the setting and press the MENU button to save the setting and exit as: Normal: Plays all the tracks in the player one by one. Repeat One: Repeat to play the current track. Folder: Play the tracks in the current folder one by one and then stop. Folder All: Repeat playback the tracks in the current folder. Repeat All: Repeat to play all the tracks in the player. Random: Playback the tracks in the player randomly.
9.7 A-B repeat, press the MENU button to save the setting and exit. If replay gap is selected, press the >>I or I<< button to set the pause time between the A-B repeats. Lyric Display This player can supports “.LRC” lyric files. During playback, if the color of LYRIC indicator from red turn to green as the figure below, it means the lyric files is available. Press and hold the MENU button to read the lyric on the display. Press the MENU button again to return to normal display.
Watching Movies 1. 2. Power on the player, the setting menu will appear on the display. Press the >>I or I<< button to select AMV then press MENU button to enter, the display will shows: 3. 4. 5. Press the >>I or I<< button repeatedly to searching the specific video tracks. Press the >II button to start playback. During playback, press >II button to pause, press again to resume normal playback.
Watching Photos 1. 2. Power on the player, the setting menu will appear on the display. Press the >>I or I<< button to select Photo, the display will show: 3. Press MENU button to enter, the list of photos will appear on the display. 4. Press >>I or I<< button repeatedly to select the photos as desire. Press the >II button to start playback.
4.1 Press the >>I or I<< button to select the functions then press MENU 4.2 4.3 4.4 4.5 4.6 button to enter: If Local folder is selected, press the >>I or I<< button to searching the specific files in difference the folders. If the specific files was found, press the MENU button to confirmed, then press >II button to start playback the selected photos. If Play set is selected, press the >>I or I<< button to select Manual play or Auto play (plays the photos in slide show mode).
Voice Recording 1. 2. Power on the player, the setting menu will appear on the display. Press the >>I or I<< button to select RECORD then press MENU button to enter. The display will show: 3. 4. 5. Press the menu button to enter the recording quality setting menu. Press the >>I or I<< button to select REC type then press MENU button to enter. Press the >>I or I<< button to select recording modes to Fine REC; Fine VOR as desire then press the MENU button to save the setting and exit.
Voice Recording Playback 1. Power on the player, the setting menu will appear on the display. 2. Press the >>I or I<< button to select VOICE then press MENU button to enter. The display will show: 3. Press the >>I or I<< button to select the specific recording tracks. 4. Press the >II button to start playback the specific voice recording track. 5. The others operations is same as music playback.
TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. Player do not power on ● Check the ON/OFF switch. Slide the switch to ON position. ● Press and hold the II button until the LCD screen light on . Music, Video, Photos can’t be ● Files not successfully transferred to the player. play Connect the player to the computer using the provided USB cable, transfer files to the player again ● Files format not correct.
Specification Dimension 3.67 x 1.61 x 0.36 inches Weight 1.53 oz PC connection USB 2.0 (Fast Speed) Flash memory 1G （ Due to same memory was used for internal operation, only approx 900 MB memory are free for download.） 3.
