Owner`s manual
8
FM Antenna
1. Power ON the unit as previous procedures.
Repeat the same procedures until the desired radio station was received and plays.
starts blinking. The unit will start to search next ( or previous ) available FM radio station then plays.
The Antenna wire on the rear of the unit is for radio reception. If reception is weak, unwind and
extend the wire or relocate the wire to improve the radio reception.
LISTEN TO FM RADIO
BLUETOOTH PARING AND PLAYBACK
1. Power ON the unit as previous procedures.
3. Power on the external BT Device and enter to searching mode.Start
to the user's manual of your BT Device. )
Notes:
When the external BT Device searched the unit, our model number
"CHT921" will appear on the display of the external BT Device.
Pairing code "0000" may need to enter.
Normal operation after paired:
1. Turn on the BT function of the external BT Device.
2. Power ON the unit as previous procedures.
4. Wait a few seconds until the unit paired to the external BT Device automatically.
5. Play the music in the connected BT Device as usual.
6. During playback:
--Press the button to pause; press again to resume normal playback.
--Press the / TUNE - or /TUNE + buttons to skip tracks.
pairing as the on screen
instructions on the external BT Player. After paired,
the Indicator will stop blinking.
( For details pairing procedures, please refer
BT ( Blue Tooth )
~ Purple: Radio
~ Blue: BT ( Blue Tooth )
~ Green: AUX 1
~ Orange: AUX 2
4. During Playback:
~ Press the VOL ( Volume ) +/- buttons to adjust volume level as desired.
~ Press the EQ button repeatedly to select and set equalizer mode as desired.
~ Press ( Mute ) button on the remote control to turn off the sound. Press again to resume.
GENERAL OPERATIONS
1. Connect the AC/DC adapter to the unit and wall outlet as the previous procedure.
6. If long period of time will not use the unit, unplug the AC/DC Adaptor from the wall outlet.
3. Press the Power / SOURCE button on the unit or the SOURCE button on remote control
repeatedly to switch to desired mode.The color of Indicator will turn to corresponding color as below:
~ Press the TREBLE +/- buttons to adjust the sound level of treble.
3. Press the FM SCAN button on the unit to auto search and plays the next availble FM station.
Repeat the same procedures until the desired radio station is searched and play. Or
5. For fine tune, press and release the /TUNE - or /TUNE + buttons repeatedly.
Note: When a FM stereo station was searched, the unit will plays it in stereo mode automatically.
4. Press and hold the /TUNE - or / TUNE + buttons on the remote control until the indicator
2. Press the Power/SOURCE button on the unit or the Power button on the remote control
to power on the unit from standby mode.
The Red
Indicator will light.
on the remote control to power off ( Stanby mode )
In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:
2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Blue and blink.
~ Press the BASS +/- buttons to adjust the sound level of bass.
~
~
3. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Blue.
2. Press the Power/SOURCE button on the unit or the SOURCE button on the remote control
repeatedly until the color of Indicator turns to Purple.
In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:In first time use or re-pairing to new BT Device, pairing the unit to external BT Device as follows:
5. When finished listening, press and hold the Power /SOURCE button on the unit or press
the Power button
the unit. The color of
Indicator will turn Red.