Installation Instructions

POWER SOURCE:

The Charging Station and Earbuds equipped built-in Li-ion rechargeable battery;

recharge it before use or when it is drained as below.

Charging Station:

1. Connect the Micro USB Plug from the supplied USB Connection Cable to the

Micro USB Port on the rear of Charging Station.

2. Connect the full sized USB Plug from the supplied USB Connection Cable to the

USB Port on the Computer or USB Charger. (Computer and USB Charger NOT

Supplied).

3. When charging, the Red Charging Indicator on the front of Charging Station will

blink. When charging is complete, it will stop blinking.

Earbuds:

1. Open the Top Cover on the top of the Charging Station.

2. Place the Left Earbud into the Left Charging Port.

3. Place the Right Earbud into the Right Charging Port as illustrated below:

To Micro USB Port

To Computer or USB Charger