FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LOCATION OF CONTROLS: FRONT: 2 1 4 4 5 1. 2. 3. 4. 5. 6. 7. REAR: 3 6 7 Top Cover Charging for Left Earbud Charging for Right Earbud LED Indicators Button Micro USB Port (for charging only) Charging Station 1 EARBUDS: 2 2 1. 2. 3. 4.
POWER SOURCE: The Charging Station and Earbuds equipped built-in Li-ion rechargeable battery; recharge it before use or when it is drained as below. Charging Station: 1. Connect the Micro USB Plug from the supplied USB Connection Cable to the 2. 3. Micro USB Port on the rear of Charging Station. Connect the full sized USB Plug from the supplied USB Connection Cable to the USB Port on the Computer or USB Charger. (Computer and USB Charger NOT Supplied).
4. Press the Button on the front of Charging Station to start charging: The Blue Indicator on the front of Charging Station will illuminate. (If the Charging Station is also on recharging, the Blue Indicator will turn off, and the Red Indicator will illuminate and blink). The Red Indicators inside Left/Right Charging Ports will illuminate. When charging is complete, the color of it will turn to Blue. A few minutes later, all indicators will turn off for energy saving.
Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. 3. Note: When the external BT Device searches for the unit, the BT Device name “CBH568” will appear on the BT Device Name List on your external BT Device. Pair your BT Device with it. When paired: 4. You will hear an audible prompt from Earbud to say “Connected”. On the Earbud, the Red Indicators will turn off.
2. Press and hold the Control Button on the Right Earbud a few seconds to power on: The Red and Blue Indicators on the Earbud will illuminate and blink. You will also hear an audible prompt from Earbud to say “Power on”. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device.
If Left and Right Earbuds was already paired to the same BT Device before. Wait a few seconds, the earbuds will automatically pair to the external BT 3. 4. 5. Device. When paired: You will hear an audible prompt from Earbuds to say “Connected”. The Red Indicator on the other Earbud will also turn off, and the Blue Indicator on it will start blink slowly. If pairing is complete you may now play music and answer calls with your external BT Device.
4. If pairing is complete you may now play music and answer calls with your external BT Device.
GENERAL SPECIFICATIONS: Charging Station: Built-in DC 3.7V, 350mAh (1.295WH) rechargeable Li-ion Battery; Recharge by DC 5V through Micro USB Port Power Source Earbuds: Built-in DC 3.7V, 40 mAh (0.148 WH) rechargeable Li-ion Battery per each Earbud; Recharge by the Charging Station Impedance of the Earbuds 2x20mW; 16 ohm Audio Power 19 mW per channel (Total 38mW, RMS) BT Version 5.
