Operator`s manual

PERSONAL SAFETY cont.
4. DRESS properly. Long sleeves and long pants are advised. Wear eye
protection. Trimmer can pick up objects like rocks and send them flying at
fast speeds. Secure long hair above shoulder length. DO NOT wear loose
clothing or jewelry. Keep your hair, clothing, and gloves away from moving
parts. Loose clothing or long hair can be caught in moving parts.
5. DO NOT overreach. Keep proper footing and balance at all times.
Proper footing and balance enables better control of the tool in
unexpected situations.
6. USE SAFETY EQUIPMENT. Always wear eye protection, such as non-
fogging, vented goggles or face shield. Proper work shoes with non-slip
soFes, heavy-duty non-slip gloves, hard hat, and hearing protection must be
used for appropriate conditions.
TOOL USE AND CARE SAFETY
z_WARNING: BE SURE to read and understand all instructions before I
operating this tool. Failure to follow all instructions listed below may result I
in electric shock, fire and/or serious personal injury. I
1. DO NOT use the tool if switch does not turn it "On" or "Off". Any tool that
cannot be controlled with the switch is dangerous and must be repaired,
2. DISCONNECT the plug from the power source before making any
adjustments, changing accessories or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
3. STORE idle tools out of the reach of children and other untrained
persons. Children MUST NOT operate the tool.
Tools are dangerous in the hands of untrained users.
4. MAINTAIN tools with care. ALWAYS keep cutting tools clean and
in good working order.
5. CHECK for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool's operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools,
6. USE ONLY accessories that are recommended for this tool.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
5