Operator`s manual

ADJUSTING THE AUXILIARY HANDLE

(Fig. 5)

1. The auxiliary handle comes on the shaft

of the trimmer. Before operating the

trimmer, make sure the auxiliary handle

is tightly locked into position.

2. To adjust handle, pick a comfortable

height and tighten.

3. To tighten, turn the auxiliary handle knob

clockwise to lock the handle in position.

Auxlnary

handleknob

Auxiliary

handle

Z_WARNING: To avoid injury, adjust the auxiliary handle for

maximum control and balance. DO NOT overreach when operating

the trimmer. ALWAYS KEEP proper balance for better control of the

tool in unexpected situations.

ADJUSTING THE HEIGHT (Figs. 6 and 6a)

1. To change the height of the trimmer, press down on the height adjustment

latch to release the height adjustment lock, then pull or push the shaft to

the desired height. There are four main operating positions and one storage

position.

2. Release the latch, then pull up on the shaft, making sure it locks into position.

Fig.6