Owner's Manual

28212 Manual_Revised_07-0713 Page 22
2.
Tap the nail or drive the screw into the workpiece at the center point of the
planned arc or circle.
3.
Proceed to rout according to the Operations instructions.
HEAVY-DUTY EDGE GUIDE (Figs. 8, 8a)
Your palm router comes with a
Heavy-Duty Edge Guide. This
edge guide can be used as
an aid in routing applications,
such as decorative edging,
straight-edge planing,
trimming, grooving, dadoing,
and slotting.
To assemble:
1.
Loosen the knob on the
cast aluminum base to
accommodate the slotted
attachment arm on the
edge guide.
2.
Align the slot in the
edge-guide attachment
arm with the shaft of the
knob, so that the edge-
guide attachment arm is
between the flat washer
and the cast-aluminum
router base.
3.
Slide the edge-guide
attachment arm up until
it stops.
4.
Tighten the knob on the
cast-aluminum base to
secure the edge guide.
Fig. 8
Fig. 8a