Owners manual
9
OPERATING INSTRUCTIONS cont.
MAINTENANCE
FORWARD / REVERSE SWITCH (See Fig. 5)
This switch changes the chuck bit rotation direction.
Push the bottom of the rocker switch for driving forward and push the top
for removing screws/reverse.
FULLY AUTOMATIC SPINDLE
LOCKING (AUTO-LOCK) (See Fig. 6)
The screwdriver Chuck (Fig. 6) is locked
when the On/Off Switch (Fig. 5) is not
pressed. This allows the driver to be
used manually when needed.
Important: When using as a manual
tool, do not press the On/Off Switch
(Fig. 5). Otherwise the screwdriver
will be damaged.
USING THE LED LIGHT
To turn on the light simply press the
On/Off Switch. When you release
the On/Off Switch, the light will be off.
LED light increases visibility and is great for dark or enclosed areas.
PROTECTION AGAINST DEEP DISCHARGING
The Li-ion battery is protected against deep discharging by the
“Discharging Protection System”. When the battery is empty, the tool
is switched off by means of a protective circuit: The chuck no longer
rotates. When this occurs you need to recharge the battery.
Your tool requires no additional lubrication or maintenance. There are no
user serviceable parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor ventilation slots clean. Keep
all working controls free of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not damage your power tool.
WARNING: Never change the
direction of rotation when the Chuck
is rotating; wait until it has stopped!
!
(Fig. 6)
(Fig. 5)
FORWARD
REVERSE
FORWARD
REVERSE
10
PARTS LIST
Parts No. Part Description Qty.
Position No.
CSD40SU-1
CSD40SU-2
CSD40SU-3
CSD40SU-4
CSD40SU-5
CSD40SU-6
CSD40SU-7
CSD40SU-8
CSD40SU-9
CSD40SU-10
CSD40SU-11
CSD40SU-12
CSD40SU-13
CSD40SU-14
CSD40SU-15
CSD40SU-16
CSD40SU-17
CSD40SU-18
CSD40SU-19
CSD40SU-20
CSD40SU-21
CSD40SU-22
CSD40SU-23
CSD40SU-24
CSD40SU-25
CSD40SU-26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Gear Case Cover
Output Spindle
Washer
Shaft Cover
Retaining Ring
Fixing Ring
Transfer Connector
Spindle Lock
Planet Carrier
Planet Gear II
Planet Frame
Planet Gear I
Inner Gear Ring
Washer
Motor Gear
Screw
Washer
Motor
Motor Cover
Pin
Power Supply Board(Li-ion)
Left/Right Housing
Self Tapping Screw
Light Body
3-5hr Adapter (ACG336SU)
Battery(Li-ion,1.5Ah,4V)
1
1
1
1
1
1
1
6
1
1
1
1
1
1
1
2
1
1
1
2
1
1
8
1
1
1
The model number will be found on the nameplate of the Screwdriver.
Always mention the model number when requesting parts and service
for your tool.
To purchase parts, call 1-800-331-4569
4 Volt
Screwdriver
Model No. 172.417700