Instruction Manual

Maintenance Before Every Every
Procedure Each Use 25 Hours of Use 100 Hours of Use
Check engine oil level X
Clean engine exterior, cooling ns and X
remove debris. Cleaning the engine top
during use is critical for proper air ow.
Check general equipment condition X
including nuts, bolts, welds, etc.
Replace broken or frayed cutting cords X
Check cutting head and line plate X
for excessive wear
Check the belt for stretching The rst time X
Adjust the drive cable if necessary after 2 hours of use
Lubricate throttle cable and X
cutting head control cable with SAE 30 oil
Change the engine oil The rst time X
after 5 hours of use
Replace the engine air lter cartridge X
and foam pre-lter if equipped.
Replace spark plug X
Maintenance Checklist
Regular maintenance is the way to ensure the best
performance and long life of your string trimmer. Please
refer to this manual and the engine manufacturer’s owner’s
manual for maintenance procedures.
MAINTENANCE
18
BEFORE PERFORMING ANY MAINTENANCE PROCEDURE
STOP THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW ALL
PARTS TO COOL. Disconnect the spark plug wire, keeping it
away from the spark plug.
WARNING
!