Instruction Manual

ENGLISH
8
MAINTENANCE

WARNING: To reduce the risk of serious
personal injury, turn unit off and remove the
battery pack before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
Your CRAFTSMAN power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regularcleaning.
Switching ON/OFF (Fig. A, H)

WARNING: Use both hands to grip the
product firmly when switchingon.

CAUTION: Do not point unit discharge at
self orbystanders.
Your blower is fitted with a 2speed ON/OFF switch located
on the top of the main handle
2
.
• To switch the blower ON, slide the ON/OFF
1
switch
forward to position1.
• To operate blower in high speed, slide the ON/OFF
1
switch forward to position2.
• To switch the blower off, slide the ON/OFF
1
switchback.
Inserting and Removing the Battery Pack
from the Tool (Fig.A, F)

WARNING: Before removing or installing
battery, make certain the trigger switch
1
is in the off
position to prevent switchactuation.
NOTE: Make sure your battery pack
4
is fullycharged.
To Install the Battery Pack into the
ToolHandle
Align the battery pack
4
with the rails inside the tool’s
handle (Fig. F).
Slide it into the handle until the battery pack is firmly seated
in the tool and ensure that you hear the lock snap intoplace.
To Remove the Battery Pack from
theTool
Press the release button
5
and firmly pull the battery pack
out of the toolhandle.
Insert battery pack into the charger as described in the
charger section of thismanual.
Proper hand position requires one hand on the main
handle
2
.
Proper Hand Position (Fig.G)

WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
asshown.

WARNING: Do not operate blower
without blow tube securely in place. Never reach down
into housing through tubehole.

WARNING: Always wear safety
glasses. Always wear respiratory protection. Always
wear hearing protection. Use of rubber gloves and
substantial footwear is recommended when working
outdoors. Keep long hair and loose clothing away from
openings and moving parts. For household useonly.

WARNING: Cut Hazard. When turning
the tool off, wait 10seconds for the fan to stop rotating
beforeremoving the blowertube.
• Always ensure the blower is switched OFF and the
battery is removed when:
‑ You leave blowerunattended.
‑ Clearing ablockage.
‑ Checking, adjusting, cleaning or working onblower.
• Only use blower in daylight or good artificiallight.
OPERATION

WARNING: To reduce the risk of serious
personal injury, turn unit off and remove the
battery pack before making any adjustments or
removing/installing attachments or accessories.
An accidental start‑up can causeinjury.
Blow Tube Assembly (Fig.E)

WARNING: Do not operate blower
without tube securely in place. Never reach down into
housing through tubehole.

WARNING: Always turn unit off and
remove the battery pack when you leave blower
unattended or when storing, checking, adjusting,
cleaning, or working onblower.
1. To attach the blower tube
3
to the power head
6
, line
up the peg
7
of the power head with the notch
8
of the
blower tube opening as shown in Fig. E.
2. Push the blower tube onto the power head until the
tube locks engage the blower tube and an audible click
isheard.
3. Pull on the tube to ensure it is securely inplace.
4. To remove the blower tube, squeeze both tabs
9
on the
side of the power head and pull the blower tube off.

WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation
of a suddenreaction.