Owner's Manual

Smart ControlPane/Setup
MENU NAVIGATION
The features on the door control can be programmed through a
series of menus on the screen and the navigation buttons. Refer
to the descriptions below.
Screen
The main screendisplays the time, temperature, and current
battery charge (if applicable).
Settings
Press the navigation button below the down arrow till you see
TEMPERATUREto view the Settings menu.
Navigation Buttons
Features
Pressthe navigation button below "MENU"to view the Features
menu.
TEMPERATURE:Display the temperature in Fahrenheitor Celsius
and show/hide the temperature.
LANGUAGE:Selecta language (Engfish, French, or Spanish).
LIGHTSETTINGS:Set duration for garage door opener fight to
stay on after operation, se/ectab/erange of 1-1/2 to 4-1/2 minutes.
Turn the Motion sensor off/on, and turn the entry tight feature
off/on.
CLOCKSETUP:Set the time, choose 12 or 24 hour clock and
show/hide dock.
CONTRAST:Adjust the contrast of the screen.
To program a remote control or keylessentry to the garagedoor
opener using the door control see page 34.
TTCSETTINGS(FORSECTIONALDOORSONLY):Set the
Timer-to-Close feature off/on and set the time interval before door
doses. NOTE:DO NOTenable TTCff operating a one-piece door.
TTCis to be used ONLY with sectional doors.
LOCK:Enable/disablelock.
PROGRAM:Add remote controls, AssureLinkTM devices,an extra
remote button to control your garage door opener fights, or a
key/ess entry.
33