Owner`s manual

MAINTENANCE SCHEDULE .S'_.,_._ _ _ _ °"_ ,/_
Check Operator Presence and
f Interlock Systems
a Check for Loose Fasteners _ 11_5
A Sharpen/Replace Mower Blades _3
T Lubrication Chart
0 Check Battery Level
a C_ean Battery and Terminals
Check Transaxle Cooling
Check V_Beffs
Check Engine Oil Level _
Change Engine Oil (with oil filter) _1,; I_ #
E Change Engine Oil (without oil filter) _1_1,2
N Clean Air Filter
G Clean Air Screen
N_ Inspect Muffler/Spark
Arrester
E Replace Oil Filter (If equipped)
C_ean Engine Coo_ing Fins IV _;,
Replace Spark Plug I1_
Replace Air Filter Paper Cartridge
Replace Fuel Filter _'
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
3 = Replace blades more often when mowing in sandy satL
4 = Not required if equipped with matetenance=free battery.
5 = Tighten front axte pivot bolt to 35 ft.4bs, maximum.
Do not over[ighten.
LUBRICATION CHART
(# - _ Spindle
Zerk Zerk
_Front Wheel
Bearing
Zerk
i I o19641
<_General Purpose Grease
_Front Wheel
Bearing Zerk
'@Engine
@ Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
17