Product Warranty

8
ASSEMBLY
Installing the Chute
1. Remove the hex washer screws in the chute base. See Figure 4.
Figure 4
2. Align the holes in the chute base with the holes in the lower chute and
secure with the previously removed screws. See Figure 5.
Figure 5
Installing the Chute Rotation Control Assembly
1. Remove the four hex washer screws from the back of the handle (two on
each side). See Figure 6.
Figure 6
2. Using the four hex washer screws, install the chute rotation control
assembly. See Figure 7.
Figure 7