Operating instructions

Owner's Manual Model No. 875.168820 Owner's Manual Model No. 875.168820
Features & Benefits
Specifications
Product Warranty
Compressor Requirements
Important Safety Instructions
Installation and Operation
Maintenance
Exploded View Drawing & Parts List
Troubleshooting
The Craftsman Model 875.16882 0 1/2"
Square Drive Impact Wrench is ideal for
general assembly, automotive, agricultural
and industrial applications.
Drive size ........................................... 1/2"
Impacts per minute ..................... 650 IPM
Free speed (No Load) ........... 7,400 RPM
Ultimate torque ........................ 400 ft. Ibs.
Weight ............................................ 4.14 Ibs.
Overall length ................................. 7.47 in.
Average air consumption ........ 5.2 SCFM
Recommended hose size .......... 3/8"1.D.
Air inlet ....................................... 1/4" NPT
Maximum Air Pressure .................. 90 PSI
ONE YEAR FULL WARRANTY ON
CRAFTSMAN TOOL
If this Craftsman tool fails to give
complete satisfaction within one year
from the date of purchase, RETURN IT
TO ANY SEARS STORE OR PARTS &
REPAIR CENTER OR OTHER
CRAFTSMAN OUTLET IN THE UNITED
STATES FOR FREE REPAIR (or
replacement if repair proves impossible).
If this Craftsman tool is ever used for
commercial or rental purposes, this
warranty applies for only 90 days from the
date of purchase.
This warranty does not include
expendable parts, such as lamps,
batteries, bits or blades.
This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state.
Sears, Roebuck and Co.,
Hoffman Estates, IL 60179
Light Use - 26 Gallon
Typical Use - 33 Gallon
Heavy Use - 60 Gallon Professional
Read Operating Instructions
Please become familiar with all the
instructions and warnings before
operating any pneumatic toot.
Always Wear Approved Eye Protection
Impact resistant eye protection should
meet or exceed the standards set forth in
ANSI Z87.1, Occupational and
Educational Eye and Face Protection.
Look for marking Z87.1 on your eye
protection to ensure that it is an approved
style.
Hearing Protection is Recommended
Hearing protection should be used when
the noise level exposure equals or
exceeds an 8 hour time-weighted average
sound level of 85dBA. Process noise,
reflective surfaces, other tools being
operated nearby, all add to the noise level
in a given work area. If you are unable to
determine your noise level exposure, we
recommend the use of hearing protection.
Avoid Prolonged Exposure to Vibration
Pneumatic tools can vibrate during use.
Prolonged exposure to vibration or very
repetitive hand and arm movements can
cause injury. Discontinue the use of any
toot if you experience tingling, numbness,
discomfort or pain in your hands or arms.
You should consult your physician before
resuming use of toot.
90 PSI Maximum
This toot is designed to operate at an air
pressure of 90 pounds per square inch
gauge pressure (90 PSI) maximum, at the
tool. Use of higher air pressure can, and
may cause injury. Also, the use of higher
air pressure places the internal
components under loads and stresses
they were not designed for, causing
premature toot failure.
California Prop 65
Some dust created by power sanding,
sawing, grinding, drilling and other
construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
Lead from lead based paint, crystalline
silica from bricks and cement and other
masonry products, arsenic and
chromium from chemically-treated
lumber.
Your risk from those exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well
ventilated area, and work with approved
safety equipment, such as dust masks
that are specifically designed to filter
out microscopic particles.
ENG-2 ENG-3