Owner's Manual

INTRODUCTION
Symbols on the machine:
WARNING! Chain saws can be
dangerous! Careless or improper use
can result in ser
ious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′ s hands must be
used to oper
ate the chain saw.
Never operate a chain saw holding it
with one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Tip contact may cause the
guide bar to move suddenly upward and
backward (so-called kickback), which
may cause serious injury.
The engine is stopped by switching the
ignition off using the stop switch.
Air purge.
Refuelling.
Chain oil fill.
Other symbols/decals on the machine refer to special
cer
tification requirements for certain markets.
You will find the following labels on your chain saw:
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal emissions requirements.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
XX
8