Operator`s manual

TOOL USE AND CARE SAFETY

I L_ WARNING: BE SURE to read end understand all Instructions before

operating these reuters. Failure to follow all instructions listed below may result

In electric shock, fire andtor serious personal injury.

1 ALWAYS use clamps or other practical ways to secure and support the workplace

to a stable platform, Holding the work by hand or against your body Is unstable and

may teed to loss of control

2 DO NOT force the tool. Use the correct tool and bit lor your application. The correct

tooland bit w]!l do Ihe Jobbelier and safer at the rats for which IIIs designed

3 DO NOT use the tool It switch does not turn ii "On" or"Off", Any tool 1halcannot be

controlled v_ththe switch Is dangerous and must be repaired

4 DISCONNECT the plug from the poWersource before making any adjustments,

ehanglng accessories or storing the tool. Such preventive safety measures reduce

the risk of starling the tool accidentally

5 NEVER leave the tool running. ALWAYS turn It oft_ DO NOT leave the |eel unll_it

comestoa compie{e slop

6 STORE Idle tools out of the reach of chlfdren end other untrained parsons_Tools

are dangerous In the hands of untrainedusers

7 MAINTAIN tocls wtth cara. Keep cutllng tools sharp and clean Prepedyma_nta_ned

toolswith sharp cutting edges are less likely tobind and are easier to central

8 CHECK for mlsallgnmant or binding of moving parts, breakage of parts, and any

other cond_tion{hatmay affect the too_'soperation if damaged, have the too{serviced

before using Many accidents are caused by poorlymaintained tools

g USE ONLY accessories that are recommended for this tool. Accessories that may be

suttable for one toolmay become hazardouswhen used on another tool

ELECTRICAL SAFETY

I Z_ WAR NING: Do not permit fingers to touch the terminals of plug when ]tnstamng or removing the plug from the oulIet.

1 Double insulated tools are equipped with a polarized plug (one blade Is wider

than the other).Thls plug will fit In a polarized outlet only one way. If the plug

does not {itfuily in the culler, reverse the plug If it sili_ does not fit, contact aquailfled

electrician to Install a polarized outlet Do net change the plug In any way

2 Double Insulation [] eliminates {he need for the three-wire grounded power

cord and grounded power supply system, Applicable onty to Class II (double-insulated)

toots This router motor fs double Insulated,

Z_ WARNING: Double Insulation DOES NOT take the place of norms! safety |

precautions when operating this tool

17543