Operator`s manual

HEAVY-DUTY EDGE GUIDE (Figs. 15 and 15a)

Your Router Combo Kit comes w}tha Heavy-Duty Edge Guide This edge guide can be

used as an aid In routing appticat_ons such as decorative edging, straight edgeplanning

and trimm_ng,grooving, dadoing and stetting

Toassemble ontofixed or plunge bases, simply Insert edge guide rodsintoedge guide

mounting slots, adjust to desired position, and lock down withthe edge guide locking knobs

Fig, t5 _=i

Usin

wl_h Usingedge.gulde_

withflxedbes_fartn_ornalculs

ELECTRONIC VARIABLE SPEED CONTROL (Fig. I6)

The electronic speed control feature allows motor speed to be malehed to

cuttersize and matedat hardness for an _mprovedfinishand exlendedbit life

Speed changes are made starting at "1"

by relating theSpeed Control Dial to the Fig. 16

"LEFT" to increase the speed, and to the

"R}GHT" to decrease the speed as

Indicated on the Dial, r_umbered

1 through6

The speed may be changed while the

router is"ON", but not tf the cutter bit

ts In the workplace,,

Yourrouter meier topcap has a

"Variable Speed Setection Chart"

located above the "ON!OFF' toggEe

switch, to help you determine the

correctspeed for the cutter bit

being used

Z_ WARNING: Before operating your router fogow all safety Instructions

in this manuel. Fa|lure to do so could result in serious personal injury.