Use & Care Manual

• Empty the drawer.

• Fully extend the drawer.

  - Fully extend the drawer. Insert screwdriver

into the slot in the side and push in on the stop until it

clears the lance. Pull drawer just past lance before

releasing stop. Repeat the process for the other slide.

 - Depress the release tabs on both sides,

(this allows the slides to ride over the stops).

Pull out to remove.

- Lift or lower (depending on the slide) the

release lever on both sides, (this allows the slides to ride

over the stops). Pull out to remove.

 - Pull slides and slide carrier out to fully

extended position (see illustration.) Hold the slide on the

cabinet while aligning it with the slide on drawer. Slightly

insert one side and repeat for the other side. Slowly push

drawer to its fully closed position to engage slide. Open

drawer and reclose to ensure proper operation.



Release

slide carrier

slide