Installation Instructions

5
Items Needed:
1/4-20 x 1/2” Carriage Bolt (Qty: 6)
11/32” Washer (Qty: 6)
1/4-20 Serrated Flange Nut (Qty: 6)
Process:
NOTE: Top and bottom shelves should have slots facing
toward back of unit. Install top shelf rst.
• Insert shelf from bottom of unit.
• Place in desired mounting location in back of unit, and
rotate into place as shown.
• Attach using (2) carriage bolts, (2) washers, and (2)
nuts in square mounting holes as shown.
• Repeat until all (3) shelves are in place.
• Finger tighten.
1/4-20 x 1/2"
Carriage Bolt
11/32"
Washer
1/4-20
Serrated
Flange Nut
Flanges
toward bottom
Top
Bottom
NOTE: Shelves may be organized in several dierent
congurations. Below is the recommended initial shelf spacing.
Top and bottom shelf spacing may be adjusted as necessary.
Top
Bottom
Middle shelf MUST be in this
position, with lock slot to the
front, for door to lock
Items Needed:
1/4-20 x 1/2" Carriage Bolt (Qty: 4)
1/4-20 x 1/2" Button Head Screw (Qty: 8)
11/32" Washer (Qty: 4)
1/4-20 Serrated Flange Nut (Qty: 12)
Process:
• Insert bottom into lower end of assembly and attach
using (4) carriage bolts, (8) screws, (4) washers, and
(12) nuts.
• Finger tighten.
Bottom
Slot
11/32"
Washer
1/4-20 x 1/2"
Carriage Bolt
1/4-20 Serrated
Flange Nut
1/4-20 Serrated
Flange Nut
1/4-20 x 1/2"
Button Head
Screw