Installation Instructions

3
TOOLS REQUIRED:
Socket wrench
3/8” socket
7/16” deep-well socket
7/16” open end wrench
Square
Screwdriver, Flathead
Screwdriver, Crosstip
Drill
1/8” drill bit
1/4” drill bit
Stud nder
HARDWARE
1/4-20 x 1/2" Carriage Bolt (Qty: 14)
1/4-20 Serrated Flange Nut (Qty: 38)
11/32" Washer (Qty: 14)
1/4-20 x 1/2" Button Head Screw (Qty: 24)
#8 - 32 x 3/8" Pan Head Screw (Qty: 12)
5/32" Hex Key (Qty: 1)
Grommet (Qty: 2)
Leveling Foot (Qty:4)
Magnet (Qty: 2)
CC(12)
BB(18)
AA(10)
DD(10)
EE(28)
FF(1)
GG(1)
HH(1)
14-10 X 3" Screw (Qty:1)
Items Needed:
1/4-20 x 1/2” Button Head Screw (Qty: 3)
1/4-20 Serrated Flange Nut (Qty: 3)
Back (Qty: 2)
Process:
• Place (2) Backs with anges up as shown. (Use packaging
material to prevent scratches.)
• Assemble (2) Backs, using (3) screws, and (3) nuts through
anges.
• Finger tighten.
HARDWARE INCLUDED:
CARTON CONTENTS
A. Side Panel
B. Top
C. Back Panel
D. Shelf
E. Door Left
F. Door Right
G. Bottom
H. Mounting Bracket
ASSEMBLY
48INCH CABINET ALSO INCLUDES:
Single Bitted Lock (Qty: 1)
C (2)
B
A (2)
F
G
E
H
D (3)
Back
1/4-20 x 1/2" Button
Head Screw
1/4-20 Serrated
Flange Nut