Product manual

Dust Extraction Hood for Plunge Base (Fig. 36a)
To attach the hood onto the
plunge base, position and
secure it to the back of the base
with the two screws (included),
as shown in Fig. 36a.
The dust extraction hood can
also be installed with the hose
outlet facing the front of the
plunge base by removing the
chip shield and attaching the
hood at the front of the base.
Dust Extraction Hood for D=
Handle Base (Fig. 36b)
Fig. 36a
To attach the hood onto the
D-handle base, align the two
tabs on the hood with the
two slots on the port at back
of the base, and secure it by
turning it clockwise (Fig. 36b).
WARNING: Always turn
the router motor off and
unplug the router from the
power source before making
any adjustments or installing
accessories. Failure to turn
router motor off and unplug
the router could result in
accidental starting, which can cause serious personal injury.
Tow Screws Included
Fig ---'_"
28084 Manual Revised 07-0712 Page 48