Product manual

To remove the chip shield from the D-handle base, press inward on the tabs until the
chip shield releases from the base and remove the chip shield. To attach, place chip
shield in position, and flex sides while pushing it in until it snaps back into place (See
Fig. 35b).
_, WARNING: The chip
shield deflectors help keep
dust and chips away from the
operator; they will not stop
objects larger than woodchips
thrown from the bit.
CAUTION: Always have
the chip shield deflector
in place on the base when
operating the router.
DUST EXTRACTION HOODS
(Figs. 36, 36a and 36b)
Two dust-extraction hoods
included with the three router
bases. Each hood is sized to
accept a 14/4-in. vac hose
adapter, sold separately.
Dust Extraction Hood for
Fixed Base (Fig. 36)
To attach the hood onto the
fixed base, align the two tabs
on the hood with the two slots
on the port at back of the
base, and secure it by turning
it clockwise (Fig. 36).
D-handle Base
Fig. 36
Tabs
28084 Manual Revised 07-0712 Page 47