Product manual

TOGGLE "ON/OFF" SWITCH (Fig. 4)

Your router motor is turned

"ON" and "OFF" by the toggle

switch located on the top cap

of the router motor.

The left side of the toggle-

switch (as you face it) is

marked "1" for "ON" and the

right side (as you face it) is

marked "0" for "OFF."

To turn the router motor "ON,"

Push the toggle switch to the

left side marked "1," or "ON."

To turn the router motor

"OFF," Push the toggle switch to the right side marked "0," or "OFF."

1. Always hold the router and cutting bit away from the workpiece when turning

the toggle switch "ON."

2. Contact the workpiece with the router and cutting bit only after the router

has fully reached the selected speed.

3. Remove the router and cutting bit from the workpiece only after turning the

router motor "OFF," and after the cutting bit has come to a complete stop.

TRIGGER SWITCH and LOCK=ON BUTTON for D=HANDLE BASE ROUTER (Fig. 5)

The D-handle base features

an on-off trigger switch and

a lock-on button for easy and

safe operation.

To Start/Stop D=handie

Base Router

Fig. 5

Connect the plug attached

the main handle to the power

outlet located on the router-

motor top cap (See indicator

on the Router).

Connect the detachable

power cord to the router

as shown in Fig. 3b.

Connect the plug of the detachable power cord to a standard, household-

power outlet.

28084 Manual Revised 07-0712 Page 18