Instruction manual

1. Placethe unitizedfenceupsidedownon a flat surface as shown

in Fig.#5a & #Sb.

2. Orient the retractableguardas shown in Fig,#5a & #5b.

Positionand hold the spring overits hub such that formed end of

spring wrapsovertheguard asshown in Fig.#So& #5b.

3. While holdingthe springoverthe hub, and formed end over the

guard, positionand pressthe straight legof spring againstsurface

'X' to align holein hubover bosson unitizedfence(seeFig.#5a &

#5b). Slipthe guardover the boss, Spring wil! now betrapped

betweenthe guardand the fence.(Spring diameteris biggerthan

the hub diameter.Youwill needto useboth handsto hold spring

in proper position,).

4, Tightly secureretractableguardin placeusing set! threading #8-

10 x _" long panheadptasformscrew anda flat washer as shown

in Fig.#5a & #5b,

5, Swing guarda few timesin the direction of arrow to see that it

retractsout freelyby itselfand returnsto its normal positionover

the routertable hole. SeeFig.#5a & #5b.

NOTE:If the guarddoes not retractout freely,loosenscrew just

enoughuntil it doesretract out freelyand snapsback to normal

forward position by itself,

6. Turn the unitizedfenceright side up.

f.'K._URE5a

FIGURE5b

ATTACHMENTOFUNITIZEDFENCEASSEMBLY

TOTABLE

FROMTABLE.

ALWAYSUNPLUGROUTERBEFORE

ATTACHINGFENCETOANDREMOVING

1. Assembleunitizedfenceassemblyto table as shown in Fig.#6.

2. Insert oneof the_-20 x 1_" long hex headbolts throughthe

holein thetabletop (from the underside)and theslot in the fence.

3. While holding the headof the bolt in the hex recesson the

undersideof the tabletop,placea flat washerover the bolt and

installa large'_-20knobontothe bolt to looselysecurethe fen_:e.

4, Repeatfor tile other slot,

NOTE:The unitizedfenceassemblycan be attachedto bible with

either sidefacingthe front, Touseother side,justremovethe

knobsandturn the fencearound.

RGURE6