Instruction manual

SELECTINGANDINSTALLING[ABLEINSERTS

1.With the desiredbit in the router,selectatable insertwhich has a

centerholeslightly largerthanthe diameterof the router [)it. Note:

Forbits largerthan approximately!_;" diameter,do not usean

insert,

2, Thetable insertsare designedto besnappedinto the router table.

Stidethe largetang under the edgeof the largehole in the router

tableas shownin Fig.#3.Usingyour thumb, pressdown on the

insertuntilthe smalltang snaps into position

3, Toremovethe insert, placethebladeof asmall screwdriverinto

the slot (with the smalltang)and prythe insert out of [he router

table.

BEFOREASSEMBLINGANDATTACHING

UNITIZEDFENCETOTABLE,MAKESURE

THATROUTERIS UNPLUGGEDANDTHEBITIS BELOWTHETOP

SURFACEOFTHETABLE.

HGURE3

ASSEMBLYOFUNITIZEDFENCE

1, Slidejointing fencethrough rectangularopeningin the cavity

providedon the unitizedfence(ribs on the unitizedfencewill slide

in the grooveson the undersideof jointing fence). SeeFig.#4a &

#4b.

2, Insert ;./.-20x t" tonghexheadbolt through the hole in the

unitizedfence (from the underside)and the slot in the jointing

fence,

3. While holdingthe headof the bolt in thehex recesson the

undersideof unitized[ence,placea flat washeroverthebolt and

screwsmall _-20 knob on bolt.

Whenknob is loosened,the jointing fencecanslide backand forth

in the cavityfor proper iointing adjustment.

FIGURe."4a

FIGURE4b