Owner`s manual

CraftsmanProfessionalRouterTables,Model
171.264630or Model171.264640,feature
thefollowing:
• A large, 18" x 27" (486 square inches), precision
die-cast aluminum table top, machined to ensure
true flatness and smoothness.
• The table top has an 11-1/2" x 7-3/4" opening for
mounting routers through the table top.
• An 11-1/2" x 9" router adapter plate will attach to
all Craftsman routers.
• The top is coated with a special anti-friction
coating to ensure ease of use without discoloring
or marring the workpiece.
• Dual cast scales ensure parallel and accurate fence
placements for:
• Specialty woodworking joints
• Edge and face routing
• Panel raising
• Precision 4" high x 27" long extruded aluminum
fence incorporates the following features:
• Fence guides for parallel depth-of-cut
adjustment.
• Adjustability for proper bit clearance
• Dust collection port for 2-1/2" wet/dry
vacuum hose
• Unique offset formed jointing fence for 1/16"
edge jointing
• Precision formed fence also allows you to perform
the following operations:
• Fluting, veining, and molding
• Grooving up to the center of a 6 1/2" work piece
• Dual receptacle ON/OFF switch operates both a
router, vacuum, or light simultaneously:
• Switch has overload protection
• Is UL and CUL listed
• Floor stand, on model 171.264640, places
the router table at a convenient working height
with leveling feet for uneven floors
• ALSO INCLUDED:
• Snap in router bit storage panel for both 1/2"
and 1/4" shank router bits
• Miter gauge for cross grain routing at 90° and
60° in two directions