Owner`s manual
Accessories
Sears offers many useful accessories for your garage door 6pener. They are illustrated below with
Sears model numbers and descriptions.
139,53702
f
139.53703
53724
53589
41A5281
Emergency Key Release
Required for a garage with NO
access door. Enables homeowner
to open garage door manually from
outside by disengaging trolley.
Outdoor Key Switch
Operates the garage door
automatically from outside when
remote control is not handy.
8 Foot Rail Extension
To allow an 8 footdoorto open fully.
10 Foot Rail Extension
Toallow a 10foot door to open fully.
Support Brackets
For finished ceilings or where
additional support is required,
based on garage construction.
Includes brackets and fastening
hardware.
Extension Brackets
(AvailableonlythroughSears Parts &
Service)
(Optional) For safety sensor
installation onto the wall or floor.
139.53681
139.53680
139.53684
i
139.53687
139,53686
139.53709
SECURITY.I. 3-Function Remote
Control
Includes visor clip.
SECURITY.l, Compact
3-Function Remote Control:
With loop for attaching key ring.
SECURITY+ Keyless Entry
Enables homeownerto operate garage
dooropener from outsidebyenteringa
password.Also can add a temporary
passwordfor visitorsorservice
persons.This temporary passwordcan
be limitedto a programmablenumber
of hoursor entries.
Premium Control Console
Provides a lock feature to prevent
operation of garage door from
portable remotes. A light feature
controls the opener lights.Can be
used to program the opener to
accept additional remotes.
Plug-in Light Control
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in
the home with a remote.
Door Clearance Brackets
(For Sectional Doors Only)
Replaces top brackets and rollers on
door to reduce height of door travel.
For use when installing opener in
garage with low headroom clearance.
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyiess Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
ff you have a Premium Control Console:
1. With the doorc/osed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door controt.
3. Press and hold the door control push bar.
4. After the opener light flashes, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the password, then
press and ho/dthe Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the SRT (learn) button on the
opener panel. After the opener light flashes,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
38