Owner`s manual

INSTALLATION STEP 3

AttachtheRail tothe HeaderBracket

NOTE:(Optional) With some existing installations, you may

re-use the old headerbracket with the two plastic spacers

included in the hardware bag. Place the spacers inside the bracket

on each side of the rail, asillustrated.

• Position the opener on the garagefloor below the header

bracket. Usepacking material as a protective base.

NOTE:If the door spring is in the wayyou'll need help. Have

someone hold the opener securely on a temporary support to

allow the rail to clear the spring.

• Position the rail bracket againstthe headerbracket.

• Align the bracket holes and join with a clevis pin 5/16"x1-1/2"

as shown.

• Insert a ring fastener to secure.

Mounting

Hole

Existing

Header Bracket

Existing 0

Clevis Pin

Spacer Mountil

Hole

DPTION WITH

SOME EXISTING

INSTALLATIONS

__ Garage

Door

Opener Carton or

-- Temporary

Support

HARDWARESHOWNACTUALSIZE

Clevis Pin 5/16"x1-1/2"

Ring Fastener