Owner`s manual

INSTALLATION STEP 3

Attach the Rail to the Header Bracket

NOTE: (Optional) With some existing installations, you may re-use

the old header bracket with the two plastic spacers included in the

hardware bag. Place the spacers inside the bracket on each side of

the rail, as illustrated.

• Position the opener on the garage ﬂ oor below the header

bracket. Use packing material as a protective base.

NOTE: If the door spring is in the way, you will need help. Have

someone hold the opener securely on a temporary support to

allow the rail to clear the spring.

• Position the rail bracket against the header bracket.

• Align the bracket holes and join with a clevis pin as shown.

• Insert a ring fastener to secure.

HARDWARE SHOWN ACTUAL SIZE

Clevis Pin 5/16"x1-1/2" Ring Fastener

Header Wall

Header Bracket

Idler Pulley

Header

Bracket

Existing

Header Bracket

OPTION WITH

SOME EXISTING

INSTALLATIONS

Opener Carton or

Temporary

Support

Garage

Door

Existing

Clevis Pin

Mounting

Hole

Spacer

Mounting

Hole