Owner`s manual

ASSEMBLY SECTION" PAGES 8 - 11
Assembly Step 1
Assemble the Rail
To avoid installation difficulties, do not run the garage
door opener until instructed to do so.
Rail
Support --
Braces
Straight
Door Arm
Extend
End Rails
Outward
Remove
Cardboard Packing
Center
Rail
Trolley Rack
Rail Assembly (
Carton _ _"
Remove
Cardboard Packing
Extend
End Rails
Outward
1. Turn the opened rail carton upside down, emptying its
contents onto a level work surface.
2. Unfold the rails, taking care to avoid kinking the screw
rod joints.
3. Rotate the rail sections so that the flat side is down and
the screw side is up for all three lengths. Keep it clean
and free of debris while you are working.
Rail Assembly
Hardware Bag
Sprocket End Rail
Chassis Assembly
Hardware Bag
Rail
Sprocket
Trolley Rack
DoorEnd Rail
Center Rail
CAUTION: During assembly, awdd pulling the rail
section housing the trolley rack away from the screw
rod. The rack is facto1T set about 9"from the end of the
screw rod to the center of the rack.
If the plastic liner slides part way out during assembly,
simply push it back in.