Owner`s manual

assembly

THE FOLLOWING TOOLS WiLL BE REQUIRED FOR ASSEMBLY AND ALIGNMENT

Pliers

Combination Square

1/8" 5/32" Socket head

setscrew wrenches

(supplied)

Tape measure Screw driver -- medium

9/16" wrench

5/8" wrench

7/16" wrench

3/8" wrench

I. BASE ASSEMBLY

Working in a welt lit, clean area is always a plus. It's

also a good idea to place all hardware (nuts and

bolts) in a bowl or other suitable container so they're

easily accessible and don't get scattered. FOR THIS

FIRST OPERATION YOU'LL NEED:

ITEM DESCRIPTION QTY.

A Shelf Brackets ........................ 6

B Corner Brackets ....................... 2

C Track Brackets ........................ 2

D Pan Head Screws, 1/4-20 x 1-1/4" . ..... 12

E Shelf Boards .......................... 3

F Pan Head Screws, 1/4-20 x 1/2" . ....... 8

G Hex Nuts, 1/4 x 20 ..................... 20

NOTE: The base of your Router Recreator is made

up of 2 Shelf Boards (front and rear), 2 Track

Brackets (top), and 2 Corner Brackets (bottom) see

illustration.

Attach all Brackets to the Shelf Boards as shown

using a 1-1/4 inch pan head screw.

Use a 1/2 inch pan head screw to attach the Track

and Corner Brackets to the Shelf Brackets (see

illustration).

TRACK BRACKET

1-1/4"PAN j

HEAD SCREW

SHELF

BRACKET

H1/2 ' PAN 1

EAD SCREW CORNER BRACKET