Owner`s manual

additional safety instructions for router-recreator
1. ALWAYS USE EYE PROTECTION.
The operation of any cutting tool can result in
foreign objects being thrown into the eyes,
which can result in severe eye damage. Always
wear safety goggles complying with ANSI
Z87.! before commencing cutting tool
operation. We recommend Wide Vision Safety
Mask for use over goggles.., available at Sears
retail or catalog stores.
2. DON'T FORCE TOOL
The Recreator was designed for smooth
operation, therefore, parts should never be
forced to operate.
3. KEEP HANDS CLEAR OF BITS
AND WORKING AREA.
4_ KEEP ROUTER RECREATOR AND
ROUTER CLEAN
After every use, clean saw dust off the
Recreator and Router,
NOTE: Motors used onwood-working tools are
particularly susceptible to the accumulation of
sawdust and wood chips and shouid be blown
out or "vacuumed" frequently to prevent
interference with normal motor ventilation.
Note and follow the instructions found on the
WARNING label which appears on the yoke
assembly.
WARNING
FOR YOUR OWN SAFETY
1. READ AND UNDERSTAND OWNER'S MANUAL OF
ROUTER RECREATOR AND ROUTER BEFORE
OPERATING MACHINE.
2. WEAR SAFETY GOGGLES AND EAR PROTECTION.
3. DO NOT WEAR GLOVES, NECKTIE, OR LOOSE
CLOTHING. TIE BACK LONG HAIR.
4. EXCEPT FOR SPINDLE WORK NEVER USE A
SMALLER DIA. STYLUS TiP THAN THE CUTTER.
5. BE POSITIVE YOU DO NOT RUN CUTTER INTO
C-CLAMPS.
WEAR YOUR
The operation of any power tool can result in foreign
objects being thrown into the eyes, which can result
in severe eye damage. Always wear safety goggles
complying with ANSI Z87,1 (shown on Package)
before commencing power tool operation. Safety
Goggles are available at Sears retail or catalog
stores.
CONTENTS
General Safety Instructions ................ 2
Additional Safety Instructions ............. 3
Introduction .. : ........................ 4
Unpacking and Checking Contents .......... 4
Getting to Know Your Router-Recreator ..... 4
Assembly .............................. 5
Base Assembly ....................... 5
Yoke Assembly ....................... 7
Cable Assemblies ...................... 8
Instaliing the Router ................... 9
Installation of the Counterweight ......... 1!
Installing the Pulley Guards ............. 12
Mounting Your Router-Recreator to a Stand. !2
Alignment ............................. !3
Operation ............................. 15
Genera! Operating Hints ................ 15
Three Dimensional Carving .............. 16
2O
Sign Making .........................
Decorative Edging ..................... 22
Spindle Decorating ................... 23
Recommended Accessories ............... 25
26
Repair Parts ...........................