Owner`s manual

MOUNT VERTICALLY
{VARIOUS SPACINGS)
MOUNT ON TOP \
OF SHELF BRACKET MOUNT DIRECTLY TO
CORNER BRACKET
MOUNT TO BOTTOM
OF SHELFBRACKET
THREE DIMENSIONAL CARVING
When Ca_'ving three dimensional objects bear in
mind that the capacities of your Recreator will limit
you to an object not more than 8 inches in diameter
and 8 inches taif. Measure the master to make sure it
is within these limits before proceeding.
8 _ _=,.
8 _
, i
Unless a-single block of wood large enough to
contain the entire carving is: available, it;will be
necessary to laminate several: pieces of 3/4 inch
stock to the size required. ' . =
An interesting effect can be achieVed by laminating
woods of contrasting colors such as redwood and
white pine, For your initial attempts, however, an all
redwood or pine workpiece isrecommended.
, ,,,,i
After the laminated workpiece has dried, remove
any excess stock with a sabre saw. band saw or
coping saw. Try to remove as much excess stock as
possible but make sure the workpiece remains
larger than the silhouette of the master.
\
BROWN KRAFT PAPER
"16