Owner`s manual

V. iNSTALLATiON OF THE
COUNTERWEIGHT
Needed for step five i
ITEM DESCRIPTION QTY,
A Counterweight ........................ 1
B Cord Hook ............................ 1
A
Screw the Cord Hook into the Counterweight about
2 or 3 turns,
Slide the Counterweight onto the Counterweight
shaft,
Move the Counterweight on the shaft compensating
the weight of the motor, yoke assembly, and router
base if mounted on yoke. When the router chuck
rests lightly on the edge of the front shelf board,
secure the Counterweight on the shaft by turning
the Cord Hook until it seats against the shaft.
Pass the motor power cord through the Cord Hook
and route toward the rear of the Recreator.
\