Operator`s manual

Putting Your Saw Together
,-..,
Your radial arm saw is easy to put together,
however it will take time. Ask a friend to
help, and follow these assembly instructions.
It is important for your safety, and for the
quality of your cuts, that the saw be put
together with care.
This manual was written for two different
models of the radial arm saw: model
113.198611 has drawers for the cabinet, and
model 113.198411 has doors.
The following assembly sections should be fol-
lowed for both models:
Unpacking / Set up
Information
Attaching Handwheel
Mounting Motor
Mounting Saw
Attaching Trim Ledge and Trim Caps
Mounting Table Locks
Mounting the Front Table
All other sections are labelled with the cor-
rect model number. Follow ONLY instruc-
tions that are meant for your model saw.
Both models work in the same way once they
are put together.
A
WARNING: Plugging the saw in
during assembly can result in electrical
shock or your fingers, hand, or arm
being cut off from blade contact. Do not
plug in the saw at any time during as-
sembly. The saw should only be
plugged in when it is to be used.
Unpacking/Set up
Both Models
1. Some parts of your radial arm saw are
packaged in small boxes according to func-
tion. As you unpack, try to keep the contents
of each of the smaller boxes together and
separate from the others. This will help you
identify and locate the parts you need during
assembly.
The following parts are included with model
113.198611:
A.
B.
C.
D.
E
F.
G.
H.
I.
J.
tC
L
Basic Saw Assembly ............... 1
Operator's Manual ................ 1
Cabinet Box ...................... 1
Drawer Box ...................... 1
Caster/Foot Box .................. 1
Loose Parts Bags ................. *8
Trim Caps ....................... 2
Trim Ledge ...................... 1
Rear Table ....................... 1
Spacer ........................... 1
Fence ........................... 1
Front Table ...................... 1
"This is the total number of loose parts bags.
Two of these are packed inside the
Caster/Foot Box, and four are packed inside
a larger loose parts bag.
A
C
Fig, 10 - Parts for Model 113.198611