Owner's Manual

19
PARTS LIST
The model number will be found on the nameplate of the buffer/polisher.
Always mention the model number in all correspondence regarding your tool.
10-in. Buffer / Polisher
MODEL NUMBER 172.107230
1 SA31.0.02.0-00 rated label 1
2 SA31.2.01-00 top cover 1
3 ST02.16.00-00 carbon brush 2
4 SA30.0.12-00 rubber cushion 2
5 SA30.0.03-00 switch pusher 1
6 SW02.44-00 switch 1
7 SW55.57.0-00 screw 2
8 SA30.0.06-00 square nut 4
9 SA31.0.01.0-00 brand 1
11 SW01.31.31-00 cable and plug 1
12 ST05.01.03-00 cable protector 1
13 ST08.01.07-00 cable clamp 1
14 SW09.01-00 terminal block 1
15 SW55.58.1-00 screw 10
17 ST05.04.52-00 rubber strip 4
18 SW50.14.0-00 ball bearing 2
19 STA51.13.02-00 rotor 1
20 STA50.13.00-00 stator 1
21 SA31.5.01-00 top handle 1
23 SA31.5.03-00 hoop 2
24 SA30.4.04-00 ring 2
25 SW60.77.1-00 washer 2
26 SW60.26.1-00 spring washer 2
27 SW56.23.1-00 screw 2
28 SA31.5.02-00 down handle 1
29 SW55.58.0-00 screw 8
30 SW57.58.1-00 screw 2
31 SA31.4.01-00 balance block 1
32 SW55.17.0-00 self-tapping screw 4
33 SA31.4.02-00 bearing bafe 1
34 SW50.09.0-00 ball bearing 1
35 SA31.4.10-00 base plate 1
36 SW60.04.0-00 washer 1
37 SW56.52.0-00 bolt 1
38 ST25.35.02.1-00 inner wire 1
39 SW11.50.11-00 connector 1
40 SW55.17.0-00 self-tapping screw 5
41 SQT030.3 loop and hoop 1
201 SA31.A.01-00 rotor set 1
202 SA31.A.03-00 base plate set 1
203 SA31.A.02-00 handle set 1
204 SA31.P.01-00 hoop set 2
205 right & left housing 1
18
PARTS LIST
The model number will be found on the nameplate of the buffer/polisher. Always mention the model number in all correspondence regarding your tool.
10-in. Buffer / Polisher MODEL NUMBER 172.107230