Product Manual

Not for
Reproduction
6 Craftsman.com
Assembly
Read entire operator’s manual before you attempt to
assemble or operate your new pressure washer.
Your pressure washer requires some assembly and is
ready for use after it has been properly serviced with the
recommended oil and fuel.
If you have any problems with the assembly of your
pressure washer, please call the pressure washer helpline
at (888)331‑4569. If calling for assistance, please
have the model, revision, and serial number from the
identification label available.
Unpack Pressure Washer
1. Remove the parts bag, accessories, and inserts
included with pressure washer.
2. Open carton completely by cutting each corner from
top to bottom.
3. Ensure you have all included items prior to assembly.
Items in the carton include:
• Main Unit
• Handle
• High Pressure Hose
• Spray Gun
• Nozzle Extension with Quick Connect Fitting
• Turbo Spray Tip
• Plastic Accessory Tray
• Hose Hook Wireform
• Oil Pouch
• Parts Bag (which includes the following):
• Operator’s Manual
• Bag of 5 Multi–Colored Quick Connect Spray Tips
• Rubber Strap
• Hardware Kit (which includes):
• Carriage Bolts (2)
• Plastic Knobs (2)
• Tree Clips (4)
Attach Handle and Accessory Tray
1. Place handle (A) onto handle supports connected to
main unit. Make sure holes in handle align with holes
on handle supports.
2. Insert carriage bolts (B) through holes from inside
of unit and attach a plastic knob (C) from outside of
unit. Tighten by hand.
3. Place accessory tray (D) over holes (E) on handle
(viewing from front of unit). Push tree clips (F) into
the holes until they sit flat against the accessory tray.
5. Squeeze hose hook wireform (G) together and insert
into grooves at bottom of accessory tray.
B
A
C
E
F
D
Assembly
G