Product Manual

Not for
Reproduction
12 Craftsman.com
How to Use Accessory Tray
The unit is equipped with an accessory tray with places to
store your spray gun, nozzle extension, high pressure hose
and quick connect spray tips.
1. Place nozzle extension with turbo spray tip in slots on
left side of accessory tray (viewing from rear of unit)
and snap in.
2. Place spray gun through grooves on right side of
accessory tray.
3. Insert multi-colored spray tips in holes provided on
front of accessory tray.
4. Wrap high pressure hose and hang on hook of
accessory tray.
NOTICE There is also a slot for storing a can of Pump
Saver™ on the back. See Pump Saver Storage.
How to Use Spray Tips
The quick–connect on the nozzle extension allows you
to switch between all the different quick connect spray
tips. Spray tips can be changed while pressure washer is
running once spray gun trigger lock is engaged. The spray
tips vary the spray pattern as shown.
Follow these instructions to change spray tips:
1. Pull back collar on quick–connect and pull current
spray tip off. Store spray tips in holes provided on the
accessory tray.
2. Select desired spray tip:
• For intense cleaning, whirls a powerful pin-point jet of
water, select turbo spray tip.
• For delicate rinse, for gentle cleaning of cars/
trucks, boats, RV’s, patio furniture, lawn
equipment, etc., select white 40° spray tip.
• For general rinsing, ideal for most all purpose
cleaning such as home siding, brick patios, wood
decks, driveways and sidewalks, garage floors, etc.,
select yellow 15° spray tip.
• For maximum rinsing, for stubborn or hard to
reach surface such as second story surfaces, paint
removal, oil stains, rust removal or other stubborn
substances (tar, gum, grease, wax, etc.), select red
0° spray tip.
• Select cyan jet flush spray tip for quick high flow
clean up and long reach cleaning of second story
siding and windows.
• Select magenta jet soap spray tip for general soap
applications or to launch soap to second story
siding and windows.
3. Pull back on collar, insert new spray tip and release collar.
Tug on spray tip to make sure it is securely in place.
Usage Tips
• For most effective cleaning, keep spray tip from 8to
24in. away from cleaning surface.
• If you get spray tip too close, especially using a high
pressure spray tip, you may damage surface being
cleaned.
• DO NOT get closer than 6 in. when cleaning tires.
WARNING The high pressure stream of water that
this equipment produces could cut through skin
and its underlying tissues, resulting in serious
injury and possible amputation.
• NEVER exchange spray tips without the trigger lock being
engaged on the spray gun.
• DO NOT twist spray tips while spraying.
Operation
White 40°
2900 PSI
2.3 GPM
Yellow 15°
3200 PSI
2.2 GPM
Magenta Cyan Red 0°
3300 PSI
2.0 GPM
Low Pressure
Use to apply
detergent
High Pressure
Turbo