Installation Guide

Visual Steps:
 Follow visual steps (1) thru (6) for complete process.
USE A PENCIL AND A LEVEL TO MARK A LEVEL LINE AROUND ALL WALLS
RECEIVING PANELS.
MARKING LEVEL LINE
1. MAKE A LEVEL LINE ACROSS ALL PANEL WALLS.
2. LEVEL LINE SPACING CAN BE FOUND BY TAKING MEASUREMENT (A) ABOVE
AND SUBTRACTING 23" (PANEL HEIGHT) AND THEN DIVIDING BY 2. THIS
WILL GIVE YOU EQUAL SPACING ABOVE AND BELOW YOUR PANELS.
(IE: 32" - 23"= 9", THEN 9" / 2 = 4.5" SPACING)
3. MAKE SURE LEVEL LINE IS PERFECTLY LEVEL PRIOR TO PROCEEDING TO
NEXT STEP.
STEP
1
2'-8"
A
1. SET PANELS ON THE FLOOR AND LEAN THEM AGAINST THE WALL.
2. MEASURE BETWEEN EACH PANEL INSURING THEY ARE SPACED EVENLY
APART. THIS MAY REQUIRE SEVERAL ADJUSTMENTS TO AVOID OBSTACLES
SUCH AS OUTLETS.
3. ONCE YOUR PANELS ARE IN THE CORRECT POSITION AND SPACING IS
EVEN, MAKE A PENCIL MARK ON THE TOP EDGE OF ALL PANELS (TRANSFER
LINE).
PANEL PLACEMENT
STEP
2