Installation Guide
FENN
#X6709-BNK-LED / #X6709-SB-LED / #X6709-FB-LED
#X6711-BNK-LED / #X6711-SB-LED / #X6711-FB-LED
#X6713-BNK-LED / #X6713-SB-LED / #X6713-FB-LED
PLEASE READ AND SAVE FOR FUTURE REFERENCE.
CAUTION
1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.
2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards.If
you are unfamiliar with proper electrical wiring connections,obtain the services of a qualified electrician.
GENERAL
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations
provided.
LED Inside No Bulbs Required
DO NOT tamper with or attempt to repair LED component of fixture
LED 10 Watt (For Small Flushmount LED Light)
LED 15 Watt (For Medium Flushmount LED Light)
LED 20 Watt (For Large Flushmount LED Light)
1.OUTLET BOX(not included)
8.SMOOTH(or BLACK) FIXTURE LEAD WIRE
2.SUPPLY GROUND WIRE(not included) 9.MOUNTING PLATE
3.FIXTURE GROUND WIRE 10.OUTLET BOX SCREWS(pre-attached)
4.BLACK SUPPLY WIRE(not included) 11.FIXTURE
5.WHITE SUPPLY WIRE(not included) 12.DECORATIVE NUT
6.WIRE CONNECTORS 13.SHADE
7.RIBBED(or WHITE) FIXTURE LEAD WIRE 14.FIXTURE SCREW
Customer Service:1 (800) 486-4892
9
10
6
11
14
12
13
1
4
2
3
7
8
5