Installation Guide

PLEASE READ AND SAVE FOR FUTURE REFERENCE.
CAUTION
1. Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock.
2. All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If
you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
3. WARNING: The outlet box must be capable of supporting at least 25 lb.
GENERAL
Remove all parts and hardware from the box and make sure that none are missing by referencing the illustrations
provided.
Bulb Required (not included): 1 Medium Base 100 Watt Max.
Customer Service: 1 [phone]
PENDANT PROGRAM #P400-ABZ / #P400-LB / #P400-TS
1-LIGHT PULLEY PENDANT
1. OUTLET BOX (not included)
2. MOUNTING PLATE
3. OUTLET BOX SCREWS and WASHERS
(pre-attached to outlet box)
4. BLACK SUPPLY WIRE (not included)
5. SMOOTH (or BLACK) FIXTURE LEAD WIRE
6. WHITE SUPPLY WIRE (not included)
7. RIBBED (or WHITE) FIXTURE LEAD WIRE
8. FIXTURE GROUND WIRE
9. SUPPLY GROUND WIRE (not included)
10. WIRE CONNECTORS
11. CANOPY
12. FIXTURE SCREWS and HEX NUTS
13. GROUND SCREW (pre-attached)
14. DECORATIVE NUTS (pre-attached)
15. CORD RESTRAINT (pre-attached)
16. CORD (pre-attached)
17. PULLEY WHEEL (pre-attached)
18. FIXTURE
19. SOCKET (pre-attached)
20. SOCKET RING (pre-attached)
21. SWITCH (pre-attached)
22. SHADE
23. PULLEY WEIGHT (pre-attached)
1
5
2
3
9
6
7
4
10
13
12
12
8
18
22
20
11
15
16
17
14
19
21
17
IMPORTANT: If you wish to change cord length,
loosen cord restraint located on the canopy with a
flathead screwdriver (not included). Adjust cord to
desired length by pulling cord up through canopy, tie a
knot in the cord and re-tighten cord restraint.
CAUTION: Do not overtighten cord restraint.
23