Installation guide

page 2
1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
2. Parts Inventory.
a
bulb required:
1 x 50 watt max. halogen bulb, type JD E11
(included)
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
m
a. canopy. 1 piece
b. hanging bracket (pre-attached to canopy).
1 piece
c. 6in. downrod and hanging ball (with pin and
clip). 1 piece
d. yoke cover. 1 piece
e. motor housing. 1 piece
f. wall control and plate. 2 separate pieces
g. remote control receiver. 1 piece
h. remote control transmitter. 1 piece
i. light kit fitter. (pre-attached to motor housing).
1 piece
j. glass shade. 1 piece
k. safety cable with vice (already attached to
motor). 1 piece
l. blade. 4 pieces
m. hardware packs
w/ remote
w/ wall
control
e
b
c
j
g
d
f
h
i
l
k