MODEL #CPM-JBZ CPM-MWW CPM-MBK CPM-PNK CPM-CH PENDANT ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-486-4892.
PACKAGE CONTENTS PART DESCRIPTION A QUANTITY Fixture A B 1 B Socket Ring (preassembled to fixture (A)) 1 C Mounting Strap (preassembled to fixture (A)) 1 D Mounting Strap Screw (preassembled to mounting strap (C)) 2 C D HARDWARE CONTENTS (shown actual size) BB AA E3 Wire Connector Qty. 3 SAFETY INFORMATION READ AND SAVE THESE INSTRUCTIONS. Please read and understand this entire manual before attempting to assemble, operate or install the product.
SAFETY INFORMATION DANGER • DO NOT connect this fixture to an electrical system that does not provide a means for equipment grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an electrical system not having a proper grounding means could cause metal parts of the fixture to carry electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or loose during the mounting or normal operation of the fixture.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents on Page 2. If any part is missing or damaged, do not attempt to assemble the product.
ASSEMBLY INSTRUCTIONS 3. Remove mounting strap (C) from fixture (A) by removing mounting strap screws (D) from the edges of the fixture (A). 3 C Save mounting strap screws (D) for later use. D ED Canopy 4. Attach mounting strap (C) to outlet box (not included) using the existing screws and washers provided with the outlet box. Make sure canopy on fixture (A) can be secured to the ceiling after mounting strap (C) is attached. A 4 Outlet Box C Make sure the outlet box can support 35 lbs.
ASSEMBLY INSTRUCTIONS 6. Prepare wire by stripping 3/4 in. of insulation from wire ends using wire strippers. Tie wire into a knot. (Fig. 6A) 6A 7A 6 Connect one of the wires (or WHITE wire) from fixture (A) to WHITE wire from outlet box using existing wire connector or wire connector (AA). Connect the other wire (or BLACK wire) from fixture (A) to BLACK wire from outlet box using existing wire connector or wire connector (AA).
ASSEMBLY INSTRUCTIONS 8. 8 Carefully arrange excess wiring and wire connectors (AA) within canopy of fixture (A). Outlet Box Align holes in edge of canopy with screw holes at ends of mounting strap (C). Secure fixture (A) with mounting strap screws (D) that were removed in Step 3 on page 5. C D A D 9. D 9 Remove socket ring (B) from the socket on fixture (A). Attach glass shade (not included) to the socket using socket ring (B).
CARE AND MAINTENANCE • Shut off main power supply. Wipe with soft cloth or use window cleaner. Do not use an abrasive cleaner. • Bulb Replacement: Use 60-watt max. medium-base bulb. TROUBLESHOOTING Warning: Before beginning work, shut off the power supply to avoid electrical shock. PROBLEM Bulb will not light. POSSIBLE CAUSE 1. Bulb is burned out. 2. Power is OFF. 3. Faulty connection. CORRECTIVE ACTION 1. Replace light bulb. 2. Make sure power supply is ON. 3. Check wiring and all connections.
JEREMIAH LIGHTING LIMITED WARRANTY Jeremiah Lighting, a division of Litex Industries, (hereinafter known as “the Distributor”) warrants all of its Products to be free from defects in material and workmanship, subject to certain conditions and exclusions, for the period of one (1) year from the date the Product was shipped to the original end use purchaser.
