Installation Guide

# 28034-SPZ
GENERAL
ASSEMBLY AND INSTALLATION
CAUTION
FIG. 1
FIG. 2
4-LIGHT FOYER
ASSEMBLY & INSTALLATION (Continued)
7. Slide the CANOPY (11) and the THREADED RING (15) up the CHAIN (14). Place the CANOPY
(11) over the OUTLET BOX (1) and secure it by screwing the THREADED RING (15) onto the
SCREW COLLAR LOOP (13). [See Fig. 1]
8. Attach the SCROLL ARM ASSEMBLY (18) to the FIXTURE (16) with the DECORATIVE SCREWS (22)
provided. Make sure that arms on FIXTURE (16) are arranged so that candles occupy spaces between the
SCROLL ARM ASSEMBLY (18). [See Fig. 2]
9. Install bulbs, MAXIMUM 40W each.
INSTALLATION IS NOW COMPLETE
SEVILLE
1. OUTLET BOX (NOT INCLUDED)
2. MOUNTING STRAP
3. OUTLET BOX SCREW and WASHER
(pre-attached to outlet box)
4. BLACK SUPPLY WIRE (not included)
5. SMOOTH FIXTURE LEAD WIRE
6. WHITE SUPPLY WIRE (not included)
7. RIBBED FIXTURE LEAD WIRE
8. SUPPLY GROUND WIRE (not included)
9. FIXTURE GROUND WIRE
10. WIRE CONNECTOR
11. CANOPY
Customer Service: 1 [phone]
Please read carefully and save these instructions, as you may need them at a later date.
Turn off the main power at the circuit breaker before installing the fixture in order to prevent
possible shock.
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a
qualified electrician.
Remove all parts and hardware from the box and the mounting package and make sure that none are
missing by referencing the illustrations provided.
1. Pull the SUPPLY WIRES (4 & 6) and the SUPPLY GROUND WIRE (8) out from the OUTLET BOX (1)
(not included) and attach the MOUNTING STRAP (2) assembly to the OUTLET BOX (1) using the slotted
holes of the MOUNTING STRAP (2) and the OUTLET BOX SCREWS and WASHERS (3). [See Fig. 1]
2. Remove the THREADED RING (15) from the SCREW COLLAR LOOP (13) and set aside. Place the
CANOPY (11) over the OUTLET BOX (1) and adjust the SCREW COLLAR LOOP (13) and THREADED
ROD (12) until the midpoint of the outside threads on the SCREW COLLAR LOOP (13) is centered
(aligned) with the surface of the CANOPY (11). Remove the CANOPY (11) and tighten both
HEX NUTS (21) down on the MOUNTING STRAP (2) and the SCREW COLLAR LOOP (13). [See Fig. 1]
3. Thread the FIXTURE LOOP (17) onto the threaded rod at the top of the FIXTURE (16) until tight.
[See Fig. 2]
4. Attach one OPEN CHAIN LINK (19) to each end of the CHAIN (14). Then attach one end of the
CHAIN (14) to the FIXTURE LOOP (17). Slide the THREADED RING (15) and the CANOPY (11)
(in that order) onto the CHAIN (14) and attach the other end of the CHAIN (14) to the SCREW COLLAR
LOOP (13). Close the OPEN CHAIN LINKS (19). [See Fig. 1 & 2]
5. Unravel the FIXTURE LEAD WIRES (5 & 7) and FIXTURE GROUND WIRE (9) and thread them
through every other link of the CHAIN (14) starting with the chain link attached to the FIXTURE
LOOP (17). Feed the FIXTURE LEAD WIRES (5 & 7) and FIXTURE GROUND WIRE (9) through the
SCREW COLLAR LOOP (13) and THREADED ROD (12). Pull the FIXTURE LEAD WIRES (5 & 7)
and the FIXTURE GROUND WIRE (9) upward to remove any excess slack. [See Fig. 1]
6. Attach the power supply wires to the fixture lead wires by connecting the BLACK SUPPLY WIRE (4) to
the SMOOTH FIXTURE LEAD WIRE (5) and the WHITE SUPPLY WIRE (6) to the RIBBED
FIXTURE LEAD WIRE (7). Loop the SUPPLY GROUND WIRE (8) around the GROUND SCREW (20)
on the MOUNTING STRAP (2). [Note: Be sure to provide an extra 3in. length of the SUPPLY GROUND
WIRE (8) for connection to the FIXTURE GROUND WIRE (9).] Tighten the GROUND SCREW (20).
Connect the remaining SUPPLY GROUND WIRE (8) to the FIXTURE GROUND WIRE (9). Use a WIRE
CONNECTOR (10) for all wire connections. Push wiring and connections inside the OUTLET BOX (1).
[See Fig. 1]
12. THREADED ROD (pre-attached)
13. SCREW COLLAR LOOP
14. CHAIN
15. THREADED RING
16. FIXTURE
17. FIXTURE LOOP
18. SCROLL ARM ASSEMBLY
19. OPEN CHAIN LINK
20. GROUND SCREW (pre-attached)
21. HEX NUT (pre-attached)
22. DECORATIVE SCREW
22
17
18
16
8
13
10
6
4
9
2
3
20
21
15
14
19
7
5
1
11
21
12