User manual

9
ASSEMBLY
To assemble your CX207, follow the
instructions given below:
Attach the upper short brace to two stand
legs and secure it using carriage bolts,
washers and nuts provided. See figure-4.
Figure-4 Attaching upper short brace to the
legs
Attach one of the lower long brace to the
leg assembly and secure it using carriage
bolts, washers and nuts provided. See
figure-5.
Figure-5 Installing the lower short brace to
the leg assembly
Assemble the other two legs with the short
braces in the same manner.
Attach the leg assemblies with the two
lower and two upper braces using carriage
bolts, washers and nuts provided. See
figure-6. Hand tighten the nuts for now.
Figure-6 Stand assembly
Now put the stand upside down and attach
a rubber foot to the bottom of each stand
legs using flat washer and hex nut as
shown in figure-7.
Figure-7 Installing the rubber feet to the
legs