User manual

5
MODEL CX207 1-1/2HP TABLE SAW
As part of the growing line of Craftex woodworking equipment, we are proud to offer the
CX207 Table Saw. By following the instructions and procedures laid out in this user manual,
you will receive years of excellent service and satisfaction. The CX207 is a professional tool
and like all power tools, proper care and safety procedures should be adhered to.
Motor ..............................................1-1/2 HP, 110 V, Single Phase TEFC Motor
Amps ..............................................11.5 Amps
Speed .............................................3600 RPM
Drive System ..................................1 Belt Drive
Miter Gauge....................................T-Slot Miter Gauge
Fence Size......................................Length 28” x Width 1-5/8” x Height 2-1/4”
Fence Rail Type .............................Extruded Aluminum
Fence Rail Size ..............................Length 54-3/4" x Width 2-3/4" x Height 1-3/4"
Table Size.......................................Width 40” x Depth 25-1/4” x Thickness 1-1/2"
Floor to Table Height......................37”
Maximum Blade Diameter ..............10”
Arbor Size.......................................5/8”
Arbor Speed ...................................4000 RPM
Maximum Width of Dado ................13/16”
Maximum Depth of Cut @ 90°........3-1/8”
Maximum Depth of Cut @ 45°........2-1/4”
Maximum Rip to Right of Blade ......30”
Maximum Rip to Left of Blade.........12”
Dust Collection Ports......................One 2.5” Port
Dimensions.....................................38-1/4x 54-3/4” x 43”
Approximate Weight .......................199 lbs.
Warranty.........................................3 Years
CX207 TABLE SAW
FEATURES