Manualshelf

Instructions / Assembly

ManualsBrandsCRAFT + MAIN ManualsAlcove Shower DoorsTides 44 in. to 48 in. x 70 in. H Framed Sliding Shower Door in Brushed Nickel and Clear Glass
12345678910
INSTALLATION PROCEDURE / STEP 7 / STEP 8
- 5 -
7
Push wall plugs into holes drilled in Step 3 and tap them in with a rubber mallet.
NOTE: If you are installing on fiberglass or acrylic, skip this step and discard the wall plugs.
Dab silicon into all 3 holes on each side and run a bead down the edges of each jamb where it will
contact the wall. Use 1 1/2" pan head screws to attach wall jamb to wall in top and bottom holes only
on both sides. The center hole will be addressed in the next step.
8
1 1/2” Pan Head Screw