Manualshelf

Full Product Manual

ManualsBrandsCRAFT + MAIN ManualsBathMarina Sliding 48 in. L x 34 in. W x 78 in. H Center Drain Alcove Shower Stall Kit in Slate and Silver Hardware
11121314151617181920
- 13 -
Adjust the door panel. Using adjustment cams, use a hex key or install rod to straighten the door
panel tightly against the shower wall.
Fasten the stopper and rollers. Adjust the stoppers so the glass door panel does not contact the
shower wall.
Note: Use hex key 2.5mm to tighten the roller.
Seal the door assembly.
Apply silicone between the bottom of the fixed panel and the base. Silicone application along the
wall channel is also suggested. In both cases, it is done from the outside of the shower area.
Keep the entire area dry for a minimum of 24 hours.
INSTALLATION PROCEDURE / STEP 19
19
LEFT HAND ASSEMBLY
RIGHT HAND ASSEMBLY